Trubond Retaining Adhesives GF 9600

Product Information

Truboncl retaining adhesives can used for non threaded cylindrical metal assemblies can increase the shear strength of press fits and slip fits.

Different sized bottles of Gluefarm Trubond Retaining Adhesives GF 9600 series

Product Container Color Viscosity (mPa.s) Gap fill (mm) Temp. range(°C) Fixture time / full cure time Tensile shear strength (Mpa)
GF 9603 50/ 250ml Green 100 – 150 0.13 -50-150 20min/ 24hrs 16 ~ 25
GF 9609 50/ 250ml Green 100 – 300 0.13 -50-150 10min / 24hrs 10~20
GF 9620 50/ 250ml Green 7500 – 10000 0.3 -50-230 20min/ 24hrs 14~25
GF 9638 50/ 250ml Green 1800 – 3300 0.26 -50,150 5min/ 24hrs 22~40
GF 9641 50/ 250ml Yellow 400 – 800 0.25 -50-150 20min/ 24hrs 8~15
GF 9646 50/ 250ml Green 400 – 800 0.15 -50-175 5min/ 24hrs 20~30
GF 9660 50ml Grey 300000 – 700000 0.5 -50-150 20min/ 24hrs 12~22
GF 9680 50/ 250ml Green 800 – 1500 0.25 -50-150 10min/ 24hrs 15~25
GF 770 52ml / 1L Clear 1 ~ 3 8hrs 30s /
GF 8SDA 340g Clear 1 ~ 3 / 20min /
CF 7157 227/500g/18.9L Grey Paste / -50~850 /
GF 9603 Retaining adhesive

Press fit, oil tolerant

High strength, Sealing retaining cylindrical assemblies. Gaps fill up to 0.13mm. Fixture in 10 minutes, prevent fretting and corrosion of metal assemblies./p>

GF 9609 Retaining adhesive

Press fit, low viscosity

High strength, for retaining rigid metal parts. Gaps fill up to 0 .13mm. Suitable for diverse metal parts.

GF 9620 Retaining adhesive

Slip fit, high temperature resistance

High viscosity, high strength, liquid retaining. Gaps fill up to 3mm. Withstands temperatures up to 230°C P’revents fretting and corrosion of metal assemblies.

GF 9638 Retaining adhesive

Slip fits high strength

Fast curing. Used for high dynamic force or cycle loading , retains cylindrical assemblies up to 0.25mrn diametral.

GF 9641 Retaining adhesIve

Press/slip fit , easy to disassemble

For bonding cylindrical parts where disassembly is required. Caps fill up to 0.25mm, fixtures in 10-30 minutes.

GF 9648 Retaining adhesive

Press fit, high strength & fast curing

Withstands temperatures up to 175°C. Gaps fill up to 0.15mm, fixtures in 5 minutes, Typical applications include holding gears onto gearbox and rotors on motor shafts.

GF 9660 Retaining adhesive

Press fit repair

Fast curing, high strength, high viscosity. For refitting worn shafts, housing covers, key and keyway bearings and sleeves, housing couplings, keyways etc. Caps fill up to o.5mm.

GF 9680 Retaining adhesive

slip fit, high strength

For retaining cylindrical axle and bushing, wheel bearing ; or for refitting worn shafts, housing and keyway etc. Caps fill up to 0.25mm. Fixture in 10 minutes