Trubond Anaerobic Flange Sealants 9500

Product Information

Trubond Anaerobic Flange Sealants are suitable for smaller gap applications and rigid metal-to metal assemblies, such as transmission pans, flanges, and transmission case covers etc.

Ideal for use on large flanges and high stress applications, Trubond Anaerobic Flange Sealant is highly flexible, even after heat aging.

This anaerobic gasketing material resists low pressures immediately after flange assembly,even before the sealant is fully cured. As the formulation is oil tolerant, it will cure through limited oil films. Trubond Anaerobic Flange Sealant is perfect for large gear box covers, critical small engine applications, and other maintenance and repair opportunities.
Trubond Anaerobic Flange Sealant fully cures in 15 minutes to 6 hours.

Product Container Color Viscosity (mPa.s) Tensile shear strength (Mpa) Gap flll (mm) Temp. range (°C) Full cure time
GF 9510 50/ 300ml Red 6oooo – 1ooooo Thixotropic 3~7 0.25 -50~200 24
GF 9515 50/ 300ml Purple 1ooooo ~ 3ooooo Thixotropic 3~7 0.25 -50~200 24
GF 9518 50/ 300ml Red 300000 – 1oooooo Thixotropic 5~13 0.25 -50~200 24
GF 9510 Anaerobic Flange Sealant

High Temperature

Rigid adhesive layer after curing. For sealing rigid flanges, gaps fill up to o.25mm. The max operating temperature up to 200°C, excellent solvent resistance.

GF 9515 Anaerobic Flange Sealant

General Purpose

Flexible adhesive layer after curing. Gaps fill up to 0.25mm of rigid machined flanges

GF 9518 Anaerobic Flange Sealant

Especially for aluminum surface

Good flexibility, excellent solvent resistance. Easy to disassemble and clean.